PRODUCTS


- cable trays
- fluorescent lampholders
- buttons
- fluo lamps
- push-buttons enclosures
- industrial plugs and sockets
- pliable conduits
- cable trunkings
- two-poled plugs
- sockets for power relays
- socket for power relay



CABLE TRAYS

They are used for storage-traying of certain number of cables together. They are put on the wall brackets which are placed at every meter of the trace. There could be straight connectors in use as well as 90* bends, tees and cross-overs for bending.

At the customer request the cable covers could be delivered.







FLUORESCENT LAMPHOLDERS


ART.101
It is used for fluo tubes connection. Installed by 2 screws M4 and the underholder.
Made by the ultraviolet stable selfextinguishing polycarbonate. Used for fluo-armature production.

ART.102
It is used for fluo tubes and starter connection. Installed by 2 screws M4 and the underholder.
Made by the ultraviolet stable selfextinguishing polycarbonate. Used for fluo-armature production.

ART.103
Used for fluo tube connection.Installed by pluging into the fluo armature enclosure.Made by ultraviolet stable selfextinguishing polycarbonate. Used for fluo-armature production.



ART.103A
Used for fluo tube connection.There is a possibility of back pressure to put the fluo tube into the plate.Installed by pluging into the fluo armature enclosure.Made by ultraviolet stable selfextinguishing polycarbonate.Used for fluo-armature production.

ART.104
Used for starter connection.Installed by pluging into the fluo armature enclosure. Made by ultraviolet stable selfextinguishing polycarbonate.Used for fluo-armature production.

ART.105
Used for plate holding art.103 and art.103A when the pluging is not done on the side og the armature but at the bottom.





FLUO LAMPS








BUTTONS


They are used for the control in the electro-distributive boxes.The installation hole is 22.5mm in radius.The strength of contact is 10A made of alloy AgNi90/10







PUSH-BUTTON ENCLOSURES

Used for controlling different equipment in factories.There are different combinations and they are delivered to the final request of the customer. The enclosures are made by polyamide.





INDUSTRIAL PLUGS AND SOCKETS

They are used in industrial needs and at building areas to connect the electrical appliances to electicity network.The degree of protection is IP44 or IP67. Made of polyamide.







PLIABLE CONDUITS

type FC
Not selfextinguishing. Used for protection of electrical transmitters. They are put in the walls under the mortar or along the walls at the corners. The resistance to the pressure is higher than 125N.

type FCO
Not selfextinguishing. Used for the protection of electrical transmitters. They are put inside before concreting of concrete plates and walls. Resistent to mechanical damages caused by a vibrator. Resistance to pressure higher than 320N.



type FS
Selfextinguishing, resistant to flame widening.Used for electrical transmitter protection.Put into wall under the mortar or along the wall at the adges.Resistance to pressure higher than 125N.

type FSO
Selfextinguishing, resistant to flame widwning.Used for electrical transmitter protection. Put into the cover before concreting of the concrete plates and walls. Resistence to pressure higher than 320N.

type FH
Halogen free, safe to the environment because they do not release damaging halogene elements (Chlorine,Bromine,Fluorine,Iodine). Used foe electrical transmitter protection. Put into the walls under the mortar or along the walls at the edges. Resistance to the pressure higher than 125N.

type FHS
Halogen free and selfextinguishing.Without halogen elements and resistant to flame widening.Used for electrical transmitter protection.Put into walls under the mortar or along the walls at the edges.Resistance to pressure higher than 320N.



CABLE TRUNKINGS

Used for placing of installation transmitters in the objects. For the usage at the electro-boxes the punctured once are used. The length of one piece is 2m.





TWO-POLED PLUGS

Used at households for the connection of the home monophase appliances. Done at different colours.





SOCKETS FOR POWER RELAYS

Used at the workshops for automatisation. They’ve got 11 contacts distributed in circle. Installed at DIN rail.





SOCKET FOR POWER RELAY

Used for installation of electro-appliances (automatic safety buttons, FID folders, time relays…) Made of galvanized steel, 1mm. thin.




top